This intense gelcoat compound removes heavy oxidation and scratches to restore optimum color and shine to boats and gelcoated RVs.

Designed to remove HEAVY oxidation, chalking, fading, minor scratches, rust and exhaust stains; plus provide protection on fiberglass/gelcoat

3M™ Marine Clean and Shine Wax 9033

Quick and easy, spray on/wipe off product that recaptures that just waxed look and feel. Excellent for use on wet or dry surfaces; no water needed! Enhances the shine of your boat's fiberglass gelcoat, marine topside paint & painted aluminum.

3M™ Marine Fiberglass Restorer and Wax, 9007,

Designed to remove HEAVY oxidation, chalking, fading, nior scratches, rust and exhaust stains; plus provide protection on fiberglass/gelcoat.

Heavy cutting liquid rubbing compound used with most paint systems requiring an aggressive cut.

3M™ Marine Restorer and Wax, 9006, 9010

Designed to remove HEAVY oxidation, chalking, fading, minor scratches, rust and exhaust stains; plus provide protection on fiberglass/gelcoat. Available in liquid and paste versions..

3M™ Marine Ultra Performance Paste Wax, 9030, 9.5 oz, 6 per case

This innovative product will leave a protective high gloss finish on marine fiberglass gelcoat, marine topside paints, painted aluminum and metal parts.

Designed for the harsh marine environment and provides protection from the suns damaging ultraviolet rays. Safe for use on fiberglass, gelcoat, marine topside paints, and marine metals.

3M™ Multi Purpose Boat Soap 9034

Concentrated formula designed to clean anything from dirty decks to soiled fabrics to degreasing engines. Mix concentrate with water for desired cleaning strength. For example: Mix 2 oz. of 3M™ Marine Multi-Purpose Boat Soap with 1 gallon of water for effective hull and deck cleaning.

Heavy-based sealer especially designed for verticle seams. Heavier bodied consistancy. Up to 1/8 inch can be applied easily. This product weathers well and does not deteriorate under sunlight. Excellent adhesion to metal, paint, glass, rubber, etc. Resists gas and oil.

3M™ Glass Cleaner

An aerosol cleaner for all glass surfaces including windows, windshields, mirrors, and side glass. May also be used to clean automotive vinyl, interior plastic and clear plastic. 3M™ Glass Cleaner is non-flammable, and will not affect painted surfaces. May be used on automotive vinyl and interior plastic" No drip" foaming action

3M™ Sharpshooter™ Extra Strength No Rinse Cleaner

This special cleaner is designed to remove such tough stains as grease, lipstick, crayon, black heel marks and smoke film from most washable hard surfaces. Removes stubborn marks, spots, and stains from almost any washable surface. No rinsing required

This super soft cloth won't scratch automotive surfaces (although be careful to use it on clean surfaces and shake it out regularly as particles it picks up may scratch). It will remove wax residue, fingermarks and scratch remover and is also great with Glass Cleaner.

Unique gel formula provides durable protection in exterior, as well as interior applications. Gel formula gives you better application control than liquids. A little bit goes a long way. This all-in-one formula cleans and conditions vinyl while adding a layer of durable protection.

Triple action protection - repels spills, resists soils and blocks stains. Strong stain protection pushes spills away from fibers. Most fresh spills clean up easily with just water. Limits reappearing spots

3M™ Marine Superbuff™ Pad 09038

Allows the do-it-yourselfer to recondition and maintain their boat, using their drill to obtain a high gloss finish like the professional who uses high-speed tools. A 6 in. diameter buffing pad with a 1 in. wool pile on both sides of the pad.

Help contain and control potentially dangerous spills of oil and gasoline but repel water.

3M™ Petroleum Sorbent

This high capacity sorbent pad features a low-profile design, so that it can be easily placed in tight areas. Ideal for cleaning up small spills and wiping down contaminated areas.

3M™ Duct Tape 3939 is composed of a waterproof polyethylene film over cloth scrim backing with a rubber adhesive used for demanding duct tape applications. Typical physical and performance characteristics

The latest advance in the 3M Duct Tape line takes high performance in new directions — outdoors into the sun and cleanly off the surface. Provides clean removal with little or no sticky adhesive residue for up to 6 months.

Filament tape is transparent with polyproplyene film back and reinforced with glass yarn filaments for light-duty applications. Nick and abrasion resistant. Strapping tape provides good abrasion, moisture and scuff resistance

A variety of soft conformable foam tapes for general purpose, mounting and joining applications. Available in single and double-coated tapes.

Ideal for long-term masking projects when tape must be left on for up to a week. Removes cleanly and easily for up to seven days without leaving adhesive residue.

Bulk packed version of part number 08612. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. One 15 foot roll is sufficient material to replace one windshield or backlite.

Non-hardening, pliable, water-resistant, medium-bodied sealer for sealing auto seams and between windshield rubber and car body. Can be used as a supplementary sealer for auto glass installation.

Spray bottles and nozzles that can be used with 3M™ products. For use with solvent or water based detailing chemicals. Long lasting, adjustable sprayer. Detailing chemicals can be sprayed with the spray head upside down. Gray color.

Designed to remove minor scratches and light oxidation while producing a high-gloss wet look finish on fiberglass and painted boats. Product contains no wax or silicone. It is also the suggested follow-up step after using 3M™ Marine Super Duty Rubbing Compound.

Restores and polishes stainless steel, brass, bronze, copper, chrome, aluminum and other marine metals by removing surface rust, oxidation, corrosion and tarnish.

Removes oxidation growth and stains and restores a lustrous appearance to bare aluminum. Use sparingly, a little bit goes a long way. We recommend testing on small inconspicuous painted areas to determine suitability.

Pigmented black plastic film tape conforms readily to irregular surfaces. Excellent stain resistance. Resists hot and cold weathering over two years. Removes quickly and cleanly. The conformability and stain resistant properties of this black polyethylene tape offers excellent performance as an industrial preservation tape.

A printable flatback paper for many masking, bundling, holding, splicing operations requiring information or color identification. Tape is printable with standard flexographic inks. Available in red, white blue yellow, and green

A faster curing version of 3M™ Marine 4200 Adhesive Sealant. The high performance polyurethane becomes tack free in one hour and fully cures in approximately 24 hours. The seal is extremely strong, retains its strength above or below the water line.

Mildew resistant, non-sagging, moisture curing silicone rubber sealant. Remains flexible and adheres to bare or painted metal, fiberglass and non-oily woods in marine environment.

A quick and easy, spray on/wipe off wax product that recaptures that “just waxed” look and feel. Excellent for use on wet or dry surfaces and fiberglass gelcoat, topside paints, painted aluminum or metal parts.

Aerosol fabric treatment protects against soil, stains, rain formulas. For upholstery, leather, ties, outdoor fabrics, clothing and fine fabrics. A protector for OEM use only is also available.

A unique vinyl ester formulation for blister or semistructural repairs above and below the waterline. Reduces water transmission and absorption into repaired fiberglass hulls and decks, and reduces blister damage.

Bonds to boat surface and provides high gloss and protection of fiberglass/gelcoat and topside paints, painted aluminum and metal parts. Resists ultraviolet damage. Liquid.

Provides a superior cut while leaving a fine swirl mark finish on all modern paint systems! This new formulation will remove P1200 and finer sand scratches while providing excellent handling characteristics with easy clean up.

Effectively removes grade 1200 and finer sand scratches while producing a very fine compound swirl mark finish. Good handling with easy cleanup. Available in 1 quart and 1 gallon sizes.

Designed to quickly and effectively remove compound swirl marks from all types of automotive paints, and produce an outstanding high gloss finish. Great for black vehicles. Good handling with easy cleanup. Available in 1 quart and 1 gallon sizes.

3M Perfect-It 3000 Final Glaze is a 3M Preferred paint finishing glaze. It is designed as a follow-up step to swirl mark remover. This product is a non-silicone wax designed to produce a durable, high gloss finish on fresh or cured paint. It can be applied by hand or with a buffer.

Designed to remove grade P3000 3M Trizact abrasive disc sand scratches, or to remove compound swirl marks, and leave an excellent high gloss finish. Ideal for small spot and panel repairs. Good handling with easy cleanup.

Medium cutting, fine finishing polish that removes light to medium oxidation, fine scratches and stains. Leaves an excellent high gloss finish on all types of automotive finishes including clear coats

Unique formulation aggressively removes sanding scratches in tooling gelcoat (P600 or finer discs with soft interface, 1000 or finer 3M™ Wetordry™ sheets), reducing sanding and compounding time while saving time.

Removes grade P600 sand scratches from production gelcoat. Leaves a brilliant, high-gloss finish without swirl/wheel marks.

3M™ Abrasive Stikit™ Tri-M-ite™ Fre-Cut™ PSA Roll-Mounted Coated-Paper Disc

Features: 

- Special Fre-Cut coating resists loading

- Unique construction provides excellent finish

Abrasive Material : Silicon Carbide

3M™ Trizact™ Hookit II™ Foam Discs & Back-up Pad

3M™ Trizact™ Hookit™ II Foam Discs remove imperfections and leave a uniform finish that easily polishes to a gloss. Trizact discs level evenly with special pyramid abrasives. Use 3M™ Trizact™ Hookit™ II Foam Discs for spot repair on fresh and cured clear coats.

Polypropylene film with special processed backing that allows taping over freshly painted acrylic lacquer or enamel surfaces sooner and with less chance of imprint damage. Can be used for lettering, striping, and two-tone separation lines in all types of truck and auto refinishing accounts. Not designed for outdoor application.

The silver colored coating on the backing of this crepe paper tape reflects ultraviolet (U.V) light. Prevents slivering and adhesive transfer during unmasking.

Long-working time, requiring less compound to be used per application Boat reconditioning of heavily oxidized surfaces/finishes, Removing P800 sand scratches on production gelcoat, Grade 1000 or 1200 sand scratches on tooling gelcoat.

A non-sagging, moisture-curing silicone rubber sealant. Remains flexible with excellent resistance to the marine environment. Adheres to bare and painted metal, fiberglass, glass, non-oily woods, and many plastics and abraded rubbers.

Color - White. High quality silicone designed for the harsh marine environment. It forms a mildew-resistant, non-yellowing seal that remains flexible even after years of exposure.

Is a high quality silicone designed for the harsh marine environment. It forms a mildew-resistant, non-yellowing seal that remains flexible even after years of exposure.

3M™ Marine Fiberglass Cleaner and Wax, 9011

Designed to remove LIGHT to MEDIUM oxidation, clean, polish, and protect fiberglass/gelcoat and marine topside paint. Unique formulation combines a rubbing compound with a special blend of waxes which restores shine and protects in one application.

3M™ Marine Color/Gloss Restorer, 09089

Resurrect the gloss in your boat's gelcoat with this compound / polish that combines an exceptionally fast cutting compound with a finishing material in one. It removes light to heavy oxidation, scratches and fine swirl marks that compounding normally leaves behind on fiberglass gelcoat.

5-way Penetrant, Silicone Lubricant, Citrus Base Cleaner, Adhesive Remover & others