Standard Abrasives™ Buff and Blend Combi-Wheel 898005, 3 in x 1 in x 1/4 in A MED 80, 10 per inner 100 per case

Standard Abrasives™ Buff and Blend Combi-Wheels are Designed with alternating flaps of Buff and Blend GP and coated abrasive AO resin bond materials, Combi-Wheels provide blending action while leaving a consistent final finish on the workplace

Standard Abrasives™ Buff and Blend Combi-Wheel 898009, 3 in x 2 in x 1/4 in A MED 80, 10 per inner 100 per case

Standard Abrasives™ Buff and Blend Combi-Wheels are Designed with alternating flaps of Buff and Blend GP and coated abrasive AO resin bond materials, Combi-Wheels provide blending action while leaving a consistent final finish on the workplace

Standard Abrasives™ Buff and Blend Combi-Wheel 898001, 2 in x 2 in x 1/4 in A MED 80, 10 per inner 100 per case

Standard Abrasives™ Buff and Blend Combi-Wheels are Designed with alternating flaps of Buff and Blend GP and coated abrasive AO resin bond materials, Combi-Wheels provide blending action while leaving a consistent final finish on the workplace

Standard Abrasives™ Buff and Blend GP Mounted Flap Brush 875500 2" x 2" x 1/4" A MED Grit

Decorative satin and matte finishing on Stainless Steel, Brass and Aluminum  In-line brush finish for Stainless Steel and Aluminum cookware; high luster finishes,Removes surface contaminants such as rust, grease and oils, Finishing Aluminum extrusions • Load-resistant; no metal contamination of work piece

Standard Abrasives™ Buff and Blend AP Mounted Flap Brush 875511 3" x 2" x 1/4" A MED Grit

Decorative satin and matte finishing on Stainless Steel, Brass and Aluminum  In-line brush finish for Stainless Steel and Aluminum cookware; high luster finishes,Removes surface contaminants such as rust, grease and oils, Finishing Aluminum extrusions • Load-resistant; no metal contamination of work piece

Standard Abrasives™ Buff and Blend AP Mounted Flap Brush 875510 2" x 2" x 1/4" A MED Grit

Decorative satin and matte finishing on Stainless Steel, Brass and Aluminum  In-line brush finish for Stainless Steel and Aluminum cookware; high luster finishes,Removes surface contaminants such as rust, grease and oils, Finishing Aluminum extrusions • Load-resistant; no metal contamination of work piece

3M™ Scotch-Brite™ Random Orbital Disc

New Scotch-Brite™ Random Orbital (RO) Discs are engineered to give you a faster-cutting, longer lasting and more consistent alternative to paper and cloth-back coated abrasives on applications like prepping bare metal for painting.

3M™ Scotch-Brite™ Match and Finish

Rows of high strength nowoven material in a radial brush form provides consistency and conformability for finishing of all metals. To be used in conjuntion with the 3M™ line of 1HP Inline Sanders. Flap Brushes come with convenient 5/8"-11 or 4-Way Keyway attachment

3M™ Scotch-Brite™ Clean and Strip Discs (Depressed Centre)

Super aggressive open-web disc reduces rework and is perfect for cleaning welds and removing rust and paint. Load resistant. Smear resistant. Safer than wire technology- no flying wire filaments. Durable, rigid and long lasting. Tough silocone carbide mineral- extra coarse

Aggressive, open-web disc for cleaning welds, removing rust and paint. Contains a backing that mounts to hook & loop disc pads. Smear resistant. These discs are offered in a wide range of sizes and grades that work well on right angle tools with hook and loop disc pads.

3M™ Scotch-Brite™ Light Grinding and Blending Disc

Durable non-woven ceramic abrasive product used for light grinding and blending applications providing a Scotch-Brite™ burr-free finish. Disc backing mounts to a centerhole pad. Tough enough to grind. Can grind and blend in single step, Resist edge wear, Long life, Contains ceramic grain

3M™ Scotch-Brite™ Clean and Finish Rolls

Fibre backed discs perform well in applications where increased pressure is required, particularly when used on edges and corners. Used for cleaning, finishing, blending and deburring applications, Available in multiple grades to cover most applications.

3M™ Scotch-Brite™ Multi-Flex Abrasive Sheet Rolls

7521 is a highly conformable abrasive with high cut for paint preparation
and wood finishes without dumping edges. 7522 is a highly conformable abrasive with silicon carbide mineral for exceptional finishes on wood and metal. Can be used wet or dry, will not rust or clog.

Touch up work on brushed stainless steel and aluminium or matt finishing on metals, plastic timber and lacquers. Can be cut to desired length for hand sanding or oscillating sanders. Can be used wet or dry, will not rust or clog. Custom widths available on request.

3M™ Scotch-Brite™ Cut and Polish Rolls

Touch up work on brushed stainless steel and aluminium or matt finishing
on metals, plastic timber and lacquers. Can be used wet or dry, will not rust or clog. Custom widths available on request.

Choose Scotch-Brite™ Surface Conditioning Belts for cleaning, finishing, blending and deburring applications. Remove burrs without gouging or undercutting. Trust genuine Scotch-Brite™ belts to deliver fantastic finishes. Ideal way to add a great finish on the work piece. A non-woven belt used for cleaning, finishing, blending and deburring applications. The reinforced backing offers good flexibility.

Grade: A CRS, A MED, A VFN, S SFN, SE A CRS

Belts are available in other grades and sizes. If you need a specific belt please contact us.

Aggressive, open-web disc for cleaning welds, removing rust and paint. Have an open web construction for cool running with excellent resistance to loading and smearing. The latest 3M technology, greatest cost/value and highest quality available.

Flexible disc for general purpose cleaning applicatioins, offering long life and improved cut rate compared to the original black clean and strip range. Reduces rework caused by gouging and undercutting from some traditional abrasives. More effective and safer than wire brushes without loading

Aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other
difficult-to-reach areas. 3 dimensional abrasive web conforms to work area. Quick change Roloc™+ system reduces downtime and process costs.

Aggressive cutting action gives a tight scratch pattern and consistent, repeatable finish on metals
and timber. Defuzzing of wood profiles and panels; removal of lacquer, paint, dirt and discolouration; matt or
satin finishing on metal surfaces.

Aggressive product capable of removing surface imperfection and handling marks. Often used to replace many conventional abrasive products such as rubber bonded wheels and
small set-up wheels. Excellent starting point for jobs requiring the availability of small diameters and narrow widths.

Long lasting and aggressive for heavy duty blending and finishing with uniform results. Often used to replace many conventional abrasive products such as rubber bonded wheels and small set-up wheels. Excellent starting point for jobs requiring the availability of small diameters and narrow widths.

Combination of Scotch-Brite™ Clean & Finish material and coated abrasive gives greater scratch depth.  Blends defects and reduces scratch roughness in one step. Blending scratches on stainless steel or fine finishing aluminium prior to anodising.

Three dimensional Scotch-Brite™ web produces consistent, repeatable results without damaging the work piece. Open, flexible flap construction is soft and pliable to produce uniform surface finishes without chatter marks. Suitable for metal fabrication and timber finishing applications.

Brushes are impregnated with abrasive mineral to give uniform cut and finish throughout product life. Open, flexible flap construction is soft and pliable to produce uniform surface finishes without chatter marks. Smoothing wood prior to varnishing or primer denibbing before final coat.

Unique three dimensional flexible bristle discs form 3M are great for cleaning and maintaining hard to reach areas on platinum, gold, silver, copper, pewter and brass pieces. Embedded mineral abrasive is harder than most metals. Great for removing oxides-no need for messy compounds.

High performance and durability for deburring and finishing applications. Excellent choice for deburring and polishing of all metal alloys as well as
many plastics and composites. Resists smearing and minimises heat build-up on the work piece.

Durable radial brushes can be used to replace wire brushes. Cleans with minimal pressure. Works on a variety of coatings and is a safe alternative to wire brushes. Abrasive mineral: aluminum oxide and Cubitron™ Abrasive grain.

Excellent to deburr, denib or defuzz timber and metal surfaces. Create satin finishes on metal. May be used individually or stacked on straight shaft tool or bench motor. High strength material is better in edge applications than clean and finish.

Used to remove vinyl stripes, numbers, letters and graphics from gel coat and painted marine surfaces without damaging the finish. Long lasting, flexible, circular disc form. Thin foamed discs are mounted together on a quick change Roloc™+ button.

High performance and durability for deburring and finishing applications. Ideal for use on hard materials such as stainless steel, titanium and high nickel alloys. Convolutely wound on a core to create a longer lasting wheel. Unique resin system, which helps minimise smearing.

Designed for deburring and finishing applications which require a highly polished finish. Used for fine deburring, polishing and finishing because of their conformability. Convolutely wound on a core to create a longer lasting wheel. Able to maintain critical tolerances because of their conformability.

Used effectively to blend and match #3 or #4 mill finishes on stainless steel. On softer metals such as aluminium, copper and brass, they are used to blend out minor surface imperfections and handling marks while providing the desired decorative finish.

Used to create uniform and attractive final finishes on ferrous and non-ferrous metals. Tough enough to finish edges and welds and soft enough to apply a final finish on large surfaces. Silicon Carbide mineral can create a unique bright surface that is often desired by stainless steel fabricators.

Good performing, debburing and finishing wheel for light duty applications. Clean up of threaded parts or welded areas. Conformable unitised construction. Available in 8 S Fin, 4 S Med

Works on a variety of coatings and is a safe alternative to wire brushes. Angled and straight bristles are more aggressive than curved. Abrasive mineral is molded into the plastic fingers and requires minimal pressure to produce results. Each brush includes wheel bushes and one set of flanges.

Aggressive, open-web disc for cleaning welds, removing rust and paint. May be mounted on a straight die grinders or bench motor. Load resistant. Smear resistant. The latest 3M technology, greatest cost/value and highest quality available.

Excellent to deburr, denib or defuzz timber and metal surfaces. Create satin finishes on metal. May be used individually or stacked on straight shaft tool or bench motor. High strength material is better in edge applications than clean and finish.
 

Designed for defuzzing of timber and general purpose cleaning of metals. Create satin finishes on metals. Uses Scotch-Brite™ High Strength discs to create a flexible conformable wheel. Multiple discs are mounted together on nylon washers for easy mounting to tapered spindles.

3M™ Scotch-Brite™ Roloc™ Light Grinding and Blending Disc

Tough enough to perform light grinding and blending of metals. Fantastic for metal fabrication of smaller parts including switch boxes and stainless steel furniture. Roloc attachment systems allows for quick changes of grades and products for completing the job faster.

A coarse, tough, aggressive non-woven disc for heavy duty deburring and finishing. Used in metal fabrication when standard coarse surface conditioning discs are not aggressive enough. Roloc attachment systems allows for quick changes of grades and products for completing the job faster.

3M™ Scotch-Brite™ Roloc™ Surface Conditioning Disc

Industry leader for surface conditioning applications including cleaning, finishing, blending and deburring applications.  Roloc attachment systems allows for quick changes of grades and products for completing the job faster.

3M™ Scotch-Brite™ Roloc™ EXL Unitised Wheel

High performance and durability for deburring and finishing applications. Soft, conformable and flexible. A threaded attachment system secures the wheel to the holder. Minimal heat build up. Grade: 8A CRS, 8A MED, 6A MED, 2S MED, 2S FIN

3M™ Scotch-Brite™ Roloc™ Clean and Strip XT Disc

Aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other
difficult-to-reach areas. 3 dimensional abrasive web conforms to work area. Quick change Roloc™+ system reduces downtime and process costs.

3M™ Scotch-Brite™ Roloc™ Coating Removal Disc

Aggressive, open-web disc for cleaning welds, removing rust and paint. Excellent for preparing surfaces for weld repairs. Less aggressive and more flexible that the XT Purple Clean and Strip. Load and smear resistant.

3M™ Scotch-Brite™ Roloc™ Bristle Disc

Use for blending, finishing, cleaning and for coating, defect, scratch and rust removal on all metals. Excellent replacement for wire brushes. Each disc is a molded bristle which is filled with small abrasive mineral particles.

This disc will give you longer life with excellent finishing and conformability capabilities. The new, hook backing reinforces the discs and makes attachment very easy. Superior finishes on solid surface, painted panels, metal and other substrates.

Their extra coarse, open web is designed to handle tough cleaning, coating removal and stripping jobs faster, more effective and safer than wire brushes without loading.

Scotch-Brite™ Cross Buffs are a leading product, with a durable, tough web and staggered design, for cleaning and polishing inside diameters.

For use on most die grinders and small bench motors, 2 & 3 in Radial Bristle create an incredibly uniform finish even around protrusions, detail grooves, patterns, and other hard-to-reach areas.

You have your choice of two holders and the industry-leading Scotch-Brite™ Pads. Use for cleaning and scrubbing decks, non-skid areas and hulls. The Doodlebug pad holder is most commonly used with a 1-1/8" x 5' wooden handle (sold separately)*.